Event Home > Labor > Hanging Element - Toy Fair - ST
Hanging Element - Toy Fair - ST
$0.00
Please note you will be billed on actual usage in 1 hour increments. A T3 representative will follow up shortly after placing your order to confirm. Rates may vary if labor is on over-time or double-time.
Install/Dismantle* :
# of Men* :
# of Hours* :
Start Time* :
(e.g. 10:00AM)
When do you want it assembled by?* :

Hanging branding elements are not available for all booth types.

Follow these steps to order: 


STEP 1: Review the height restrictions and Hanging Element Guidelines.


All elements hung from the ceiling must be hung over the booth and must

not overlap the booth perimeter. There must be at least 10’ between the

element and neighboring booths.


Level 1 (Halls 1A, 1B & 1C):  The top of the hanging element may not be

higher than 14' from the floor and the bottom of the hanging element may

not be lower than 11' from the floor. 


Level 3 (Halls 3A, 3B, & 3E): The top of the hanging element may not be

higher than 30’ from the floor and the bottom of the hanging element may

not be lower than 16’ from the floor. 


STEP 2: Decide whether or not you need electrical. If yes, follow this link

and order electrical through Jake, the Javits ordering system. 


STEP 3: Order Hanging Branding Element Assembly through T3 here.


STEP 4: Order Sign Hanging through T3 here.


STEP 5: Print your shipping labels and ship your sign to the advanced

warehouse by February 14, 2020.